KS15

1. Clean & Dry the Skin
    Make sure the area is clean, dry and free from oils, creams or lotions.
2. Cut Out Your Stencil
    Carefully cut around the stencil design you would like to use.
3. Remove the White Backing Paper
    Gently peel away the white backing sheet to expose the adhesive side.
4. Apply the Stencil
    Place the stencil firmly onto the skin. Smooth it down carefully so all edges are securely attached.
5. Remove the Protective Film
    Slowly peel away the clear protective film from the top, leaving the stencil securely in place.
6. Apply the Henna
    Fill the open areas of the stencil evenly with henna paste. Make sure the entire design is covered without moving the stencil.

Natural / Organic Henna
Leave the henna paste on for approximately 4–6 hours for a richer, deeper color.

Once completely dry, gently rinse the area with water and carefully peel away the stencil.

The henna color may appear lighter at first and gradually deepen over the following hours.

Instant Henna
Leave the henna on for approximately 15–30 minutes, or until completely dry.

Once dry, gently rinse with water and carefully peel away the stencil.

The design should appear much faster than natural henna.

For Best Results:

Avoid rubbing or moving the stencil while the henna is drying. Apply the stencil smoothly against the skin so there are no gaps underneath. Always perform a patch test before use and discontinue use if irritation occurs.