Nish Stencils Co
Instant Henna
Instant Henna
Couldn't load pickup availability
Instant Henna Application
Instant henna develops more quickly than natural henna. Always follow the instructions and processing time printed on your henna cone.
Drying and Removal
1. Apply a smooth, even layer of instant henna over every open part of the stencil.
2. Allow it to dry for approximately 15–30 minutes, or for the time stated on the product packaging.
3. Do not move or touch the area while the henna is drying.
4. Once completely dry, carefully lift and remove the stencil.
5. Remove the dried product gently according to the directions on the henna cone.
6. Avoid rubbing, scratching or exfoliating the finished design.
Do not leave instant henna on the skin longer than directed by its manufacturer.
How to Use Your Nish Henna Stencil
How to Use Your Nish Henna Stencil
1. Clean & Dry the Skin
Make sure the area is clean, dry and free from oils, creams or lotions.
2. Cut Out Your Stencil
Carefully cut around the stencil design you would like to use.
3. Remove the White Backing Paper
Gently peel away the white backing sheet to expose the adhesive side.
4. Apply the Stencil
Place the stencil firmly onto the skin. Smooth it down carefully so all edges are securely attached.
5. Remove the Protective Film
Slowly peel away the clear protective film from the top, leaving the stencil securely in place.
6. Apply the Henna
Fill the open areas of the stencil evenly with henna paste. Make sure the entire design is covered without moving the stencil.
Natural / Organic Henna
Leave the henna paste on for approximately 4–6 hours for a richer, deeper color.
Once completely dry, gently rinse the area with water and carefully peel away the stencil.
The henna color may appear lighter at first and gradually deepen over the following hours.
Instant Henna
Leave the henna on for approximately 15–30 minutes, or until completely dry.
Once dry, gently rinse with water and carefully peel away the stencil.
The design should appear much faster than natural henna.
For Best Results:
Avoid rubbing or moving the stencil while the henna is drying. Apply the stencil smoothly against the skin so there are no gaps underneath. Always perform a patch test before use and discontinue use if irritation occurs.
Share
